Updating a dining set is a great way to bring a new look into our dining room or breakfast area without breaking the bank!
I got this tired-looking dining set for free on Craiglist and a simple paint makeover turned into a beautiful, classic set that is the shining star in our breakfast room.
I'm so glad to check this project off my to-do list. First, my garage got a lot less crowded, and secondly, this week it's been cold, no need to work outside. :)
This is a photo-loaded post, it looks like there were many steps involved, but not really.
This is not a tutorial, it's more like an account of everything I did, including the mistakes. Hopefully, you can avoid them.🤞🏽
*This post contains affiliate links for your convenience. Click here to read my full disclosure policy.
During my previous post, I showed you the findings.
A set of four chairs and a pedestal table.
The entire set was in overall good condition, it only needed a paint or stain makeover.
Let's take a look at how this makeover unfolded!
Tools & Materials Used:
The first step I had to do was to remove that top layer of lacquer that the entire set had. The lacquer is the clear product that is applied to furniture, the product that goes on top of paint or stain to protect it.
I don't know why I went ahead and used the stripping gel Citristrip on this set. The only reason I might have to give you is that I was working on another similar project where I've been using that product.
Well, that was a BIG MISTAKE!
Using a stripping gel on these chairs and pedestal table was a messy over-kill.
Why?
Because this dining set didn't have a thick layer of paint or varnish. A light sanding would've been more than enough to remove the light sheen and get the entire set ready for paint.
That's precisely one question you have to answer yourself when thinking about refinishing a piece...
Am I going for a painted treatment or a stained one?
If you're going for a painted treatment, there's no need to completely remove all the layers of paint or stain the piece has. Most of the time you only need to lightly sand the clear shiny topcoat, which will provide good adhesion for the new paint treatment.
If you're going for a new stain treatment, you have to go to the bare wood. You need to remove all the layers of paint and/or stain the piece possesses before applying the new stain.
OK, back to this makeover.
This is how the chairs looked after about 30 minutes of applying the Citristip.
All that gooey product had to be removed! 😭
Removing the Citristrip from the tabletop was easy using a plastic scraper, but on the chairs and table base, it was a pain when dealing with so many spindles and crevices.
In the previous post, I asked you, my dear readers, for help. Luckily Tracy, Donna Wilkes, and Beck from Beckwith's Treasures gave me invaluable information on how to remove just about anything from furniture pieces. I love Beck's tutorial on how to refinish a piece of furniture right HERE. It has lots of amazing information from someone who has done this kind of work not just one but many, many times!
I scraped off some of the stripping product, but then I had to wash off the remaining product with denatured alcohol and steel wool. -That's the product I had on hand. It worked fine, it was like giving the chairs and table a bath until all the sticky product and varnish was gone.
Afterward, I used the palm sander with fine grid sandpaper on the tabletop, the chairs and table base were given a light sanding by hand.
Then, it was time to apply the primer. I used Kilz 2 Latex.
Now, the reason for applying primer before painting the wooden surfaces is because the primer seals the wooden surfaces so that the paint doesn't soak into them. The primer also prevents bleed-through from knots and other natural blemishes and coloring in the bare wood.
You can see the chairs and table base in the picture below with one coat of primer.
One more coat of primer was needed.
Then, some more sanding. Well, after each application of primer and/or paint you have to sand the pieces to get rid of rough spots. I only sanded after the second application of primer -220 grid sandpaper.
Painting by hand with a brush takes time. This kind of chair is hard to paint, with so many rails, spindles, and legs. :/
Well, I had a stroke of luck. My brother-in-law happened to stop by and offered to lend me one of his spray paint guns.
Things got even better, Mr. RLC took charge of the project. I couldn't believe it!
All for the fun of using the paint sprayer. :)
He gave the chairs and base of the table two coats of Behr - Off White in a semi-gloss finish.
He also screws the rush seats back onto the chair frames not before dusting them very well. Oh, and he also installed the leg caps on all of the chairs and table.
The tabletop was the last piece of the puzzle. I had this quart of Rust-Oleum Wood Stain -Driftwood finish from when I painted the floor in the guest room. So, I tried it underneath the table.
The color was similar to the one on my inspiration table.
I applied the driftwood stain on the table using a foam brush.
Two coats were applied, waiting for the stain to dry in between coats, taking away excess with a rag.
He gave the chairs and base of the table two coats of Behr - Off White in a semi-gloss finish.
He also screws the rush seats back onto the chair frames not before dusting them very well. Oh, and he also installed the leg caps on all of the chairs and table.
The tabletop was the last piece of the puzzle. I had this quart of Rust-Oleum Wood Stain -Driftwood finish from when I painted the floor in the guest room. So, I tried it underneath the table.
The color was similar to the one on my inspiration table.
HighFashionHome |
I applied the driftwood stain on the table using a foam brush.
Two coats were applied, waiting for the stain to dry in between coats, taking away excess with a rag.
Once both coats were dry, it looked a bit too "white-ish" for my liking.
But after applying Annie Sloan's clear and dark wax, and buffing it, this is how it looks. The dark wax made a huge difference!
Here, Inside the breakfast room area.
Not bad at all! Using wax as the protective coat on the tabletop makes me a bit nervous, but my kids are not that little any longer.
Using the spray paint gun was such a time saver! Not even mentioning the awesome finish it gave the chairs and base. I know what's going to be the mister's Christmas present. ;)
This is how it looks with the kitchen in the background.
And the before and afters.
Thanks so much for all your help!
For more Home DIY ideas check these out:
But after applying Annie Sloan's clear and dark wax, and buffing it, this is how it looks. The dark wax made a huge difference!
Here, Inside the breakfast room area.
Not bad at all! Using wax as the protective coat on the tabletop makes me a bit nervous, but my kids are not that little any longer.
Using the spray paint gun was such a time saver! Not even mentioning the awesome finish it gave the chairs and base. I know what's going to be the mister's Christmas present. ;)
This is how it looks with the kitchen in the background.
And the before and afters.
Thanks so much for all your help!
For more Home DIY ideas check these out:
*This post contains affiliate links for your convenience*
Guauuuuu Cristina !! Que linda se ve esa mesa pintada de blanco y con la cubierta del color natural !!
ReplyDeletethis turned out fabulous! love the Driftwood color on the tabletop!
ReplyDeleteOK, i really like the finish on the table top!! I want to do something with our dining table!! Someday!
ReplyDeleteLooks great, I think I need a sprayer. Can I borrow your husband??
ReplyDeleteSimply stunning!!!! I'm loving that white-washed top finish too -- it's giving me some ideas for a drum table I've bee toying with painting! Pinning for inspiration!!! :) Linda
ReplyDeleteThis turned out so beautifully! You BOTH did a great job.
ReplyDeleteThe rush seats and the color on the table top gives just the right touch of home!
I hope you share it with us at WIW, we'd love to have you!
Patti
Fantastic. I love it.
ReplyDeleteThis is so beautiful, it's making me want to do my set! Oh my!
ReplyDeletewowza. that table came out amazing. Since the kitchen project , I only use a paint sprayer for all my projects. hope it's on your list . Have a great week.
ReplyDeleteCristina - that is AMAZING!!! You (both) did a fabulous job and it looks so amazing in your gorgeous kitchen. YAY!!!! Very well done, bravo!!
ReplyDeleteTABLERRIC! That means Table Terrific! You did a wonderful job and I love how it changed the whole look of the set. GREAT job- xo Diana
ReplyDeleteSo beauiful. You did an incredible job. It looks great in your kitchen.
ReplyDeleteOh, my WORD! This looks fabulous! My oak kitchen table is badly in need of a redo, and your post has really inspired me. I love the look!
ReplyDeleteYou did an amazing job Cristina and it looks fantastic in your kitchen. Bless your uncle! I will trade you one of my tools for him.....lol
ReplyDeleteAmazing-the set looks sooooo good. I love the finish you did on the top.
ReplyDeleteAmazing transformation! The top of the table is beautiful! What a stroke of luck you had to have your relative finish painting for you, I wish that would happen to me! Lol! I love it Cristina!
ReplyDeletePopped over from MMS. It turned out beautiful. Your hard work paid off. Just finished a similar dining table using chalk paint and a wood graining tool. Like you, I wanted to finish before it got too cold to work in the garage and happy to have more room in the garage as well. Stop by and have a look: http://www.thediyspot.com/2014/10/dining-room-table-part-2/ I've used Citristrip a lot in the past, not so much lately especially if I'm going to use chalk paint. However, the couple of times I attempted to use my paint sprayer, it resulted in a pebbly orange peel finish. I know it's a time saver but I haven't mastered it's use. DIY is just and ongoing learning experience.
ReplyDeleteTHIS LOOKS FANTASTIC! And yes, it was necessary to use all caps here because it turned out AWESOME! I've been so tempted to use a paint sprayer but always chicken out. I just imagine myself turning around and spraying whatever is close to me...my house, car, patio, child. You're giving me hope! I always love your projects, but this one might be a favorite =) Kyla @ http://houseofhipsters.com/
ReplyDeletehehehe yeah, it feels like that, Kyla! Once you begin spray painting you don't want to stop, it's so easy! Thanks so much for stopping by and for your kind words!
DeleteFabulous transformation! Love the colors you used. Gorgeous!!!
ReplyDeleteOh my gosh... I can't even believe that's the same set! The transformation is AMAZING! Light, bright, so much prettier! Well done!
ReplyDeleteSo pretty and SO MUCH BETTER!!
ReplyDeleteWell done! The table and chairs look like brand new!
ReplyDeleteBethany BuildinLondon
Hi, I think my previous question didn't post. I found this page when I searched for examples of the rustoleum driftwood. I LOVE how your table turned out but so far I am not as impressed with mine. I was wondering what you did in between each step. As in, did you sand between coats of stain, or befoire applying wax? And did you wait a certain time before applying the wax? I'm never used wax before but I don't think I could do any more damage than I already have so I would love to try. Any help would be very much appreciated.
ReplyDeleteHi, I think my previous question didn't post. I found this page when I searched for examples of the rustoleum driftwood. I LOVE how your table turned out but so far I am not as impressed with mine. I was wondering what you did in between each step. As in, did you sand between coats of stain, or befoire applying wax? And did you wait a certain time before applying the wax? I'm never used wax before but I don't think I could do any more damage than I already have so I would love to try. Any help would be very much appreciated.
ReplyDeleteHi Mandi, The sanding was done before applying the stain, I didn't like the old finish, and even though the sanding was rough, some traces of the old brownish color couldn't be removed (now I think they give more character to the table).
ReplyDeleteI didn't sand in between coats of stain. My waiting time for the stain to dry was approx. two hours. As I stated in my post, I didn't like how the two coats of stain looked on the table, too white and blah. I thought I've made a mistake too, so, I tried to fix it with wax and it worked! The one that works is the dark wax, but for the dark wax not to look like a big dirty patch, you need to FIRST apply the clear wax, this is very important -First clear wax and buff it, once done with the buffing of the clear wax, begin applying the dark wax in small quantities until you're happy with it, buff again and you're done.
I've been using this table everyday and the finish is still going strong. Probably I'm going to apply some more wax when warmer temperatures arrive.
Apply the wax with a brush, there are special brushes for wax but I think you can do it with a paint brush, dip the bristles slightly into the wax and spread it very well on the wooden surface. The buffing is done with an old rag.
I hope this can be of help. Let me know it turned out.
Cristina, how is the top holding up? I love the color combo. Was going to do my table all white (it is wood), but now might go this route. Just curious of wax only on top really holds up to the daily (ab)use.
ReplyDeleteThanks Elena! I've been using this table everyday for almost a year now and I'm very happy at how good it still looks. I was also worried about using wax to protect it because this is the table we used the most. At first any glass or cup was placed on a coaster because I was afraid the table would get those ugly rings beverages leave, but after about a month of use I didn't worry any more, so far I see no marks on the table at all.
DeleteI might say wax is a strong protective product. Spills and dirty spots had been cleaned up with a damp cloth, some times adding a bit of a soft soap on it, rinsing again with a damp cloth. It's about time for me to re-apply the wax, the table doesn't have the same sheen as when it was finished, however that's something that's very easy to do and it usually takes less than 10 minutes.
Thanks for your response, Cristina! Now I know what I will be doing for sure!
DeleteLet me know how it turns out or if you have any other questions!
DeleteHugs,
Cristina
I just cant believe in that transformation Great Work ! :)
ReplyDeleteThanks so much Helena!
DeleteHi I love this! Are there different shades of the dark wax or is it just called "dark wax" ? Thanks!
ReplyDeleteThanks Josh! As far as I know there's only one shade of dark wax, at least in the brand I use: Annie Sloan.
DeleteMy wife is excited to do this to our table, she has never worked with wax before. Are there any tips you can give us? Also do you apply the dark wax first and then the clear wax? Thanks!
ReplyDeleteI just read your response to An earlier post of the order of applying the wax, so is there a trick to applying wax in general? ThNk you! Your table looks wonderful !
ReplyDeleteHi Josh, yep, I first applied the clear wax and then the dark. You can apply the wax with a lint-free cloth, though, I applied it using a wax brush, rubbing the wax on a circular motion to form a thin, even coating. Let the wax dry completely before polishing it with a clean cloth. Then, you can apply one or more coats of dark wax, depending on how dark you want the final finish.
DeleteCristina, you are so creative good work! <3
ReplyDeleteHello Anne,
DeleteI agree with you, Cristina is so creative. I would like to see more people eho have new and so interesting ideas !
You are so amazingly kind! Sorry about my late response. XOXO
DeleteI wish i could make such beautiful things, but my hands are like tided together :)
ReplyDeleteI really like the table top color and wanted to do something similar. I'm glad to see you have the honey oak type floors like I do. I was afraid it wouldn't look good with them, but it seems fine in our pics. What are your thoughts?
ReplyDeleteJenny, I really dislike the color of my floors, but that's something I have to live with. they're still in good shape to go into the hassle of refinish them. I think both look fine.
DeleteThis table is absolutely beautiful! I love how you stained the top and then added wax to give it even more definition. We definitely want to try this sometime!
ReplyDeleteThanks! We're enjoying it. :)
DeleteYour table is beautiful, but oh the work! Please tell me why you didn't use chalk paint and avoid all that stripping, sanding, and priming.
ReplyDeleteI didn't use chalk paint since it's a table we use a lot and I didn't want the base with a distressed look. So far, the paint has held very well, two kids and two adults, and no chipping at all.
DeleteChristina, chalk paint with wax, especially Annie Sloan chalk paint, is very durable. You say you have small children, but the wax is very safe unless your children chew on the table. From what I have read they are past that stage. I have done a table for my niece that they use every day and it is holding up quite well. People use it to paint their kitchen cabinets. You do not have to use distress it if you want it to be just a smooth paint finish., don't distress. I have not primed nor sanded in years. Best of luck to you and your painting endeavors.
DeleteOh Lane, Now I know! :D Yes, chalk paint is very durable, as is the wax! I've been using this table for three years now. doing nothing to it and it's still looking great!
DeleteRustoleum makes a wipe on glaze you can use to de-white a paint job if you don't want to use wax next time. Your table is beautiful.
ReplyDeleteThanks Theresa! Good to know. I gotta save that tip for next time I use glaze. :) Though, the wax did a really good job. Almost two years and I haven't applied a second coat... It's long due, but the table is still looking good.
DeleteLove love love this table! I am going to purchase the supplies to do it this weekend :) Quick question- do I have to use the wax when I am finished? I was looking for the type of wax you used and I only found it on Etsy or Ebay. Do you recommend another wax product?
ReplyDeleteCristina, I was poking around the internet looking for the exact limed oak look I wanted and came across your table. It came out beautifully!!!! One of my favorites of all that I've seen. Everything you do is right up my alley!!!
ReplyDeleteCristina, Glad I found this. My old (looks dirty too) butcher block table has been waiting for a miracle. Thanks for sharing how you did it -- will definitely follow your steps. Love the color.
ReplyDeleteCristina, Glad I found this. My old (looks dirty too) butcher block table has been waiting for a miracle. Thanks for sharing how you did it -- will definitely follow your steps. Love the color.
ReplyDeleteO my gosh, what an amazing job, wish I was that brave! Bet you are as proud as punch!!
ReplyDeleteBeautiful! I have a table about that size that needs to be redone. I had been looking online at ones similar to what you were looking at but was astounded at the price. I found a table on Craigslist that is very similar. I will follow your steps and and hopefully have something as pretty as yours! Absolutely lovely!
ReplyDeleteOh yeah, those prices are ridiculous. I'm pretty sure you're gonna love it.
DeleteI just love this table! I have an old Ethan Allen set from my parents that really looks it's age. I would love to do something like this, but the table has a formica top. Do you think that it would work? I know that I could paint the formica top, but do you know of any way to still keep that wood grain look?
ReplyDeleteOh my goodness. Since you were familiar with Annie Sloan chalk paint (I see you used the wax,) why in the world did you do all of that stripping? Your project is beautiful, but all the work you did makes me exhausted. You could have stripped the top, cleaned the rest of the set with a little Dawn and warm water, and then painted with old white.
ReplyDeletePlease remember with your next project that you do not have to strip and sand anything. With Annie Sloan's to paint all you have to do is wipe it down and paint.
Oh Lane, I don't even want to remember that. The chairs were even more trouble. such a dumb decision! :/ You're so right, those are the exact steps I should had taken. Live and learn. Thanks for stopping by! :)
DeleteLove your table! I am going to do the exact same thing with my table. My question is, I have 2 small children. What do you suggest I use in place of the wax to protect it? TIA!
ReplyDeleteHi Michelle, the other product you can use is clear polyurethane or Shellac, though I haven't used those products in years! I would go with wax if I have to do it again, it's a more natural finish. And you know what? I haven't re-applied any more wax to it and it's still looking great after almost three years of using it daily!
DeleteIncredible job! Gorgeous!!
ReplyDeletei have a table like ours but it is not wood my is press wood with a top laque i by it from ikea
ReplyDeletei want to know how to do the same thing but with press wood ?